The Gullwing Sidewinder II 10" Silver trucks are designed for carving. Casted with aluminum, the hanger measures 6.22" long with a 9" axle length. The double kingpins provide an extremely tight turing radius. With a board side barrel bushing for stability, the road side tall cone provides additional carving ability.
Due to their intense turing radius, please be aware that these trucks must be set up on an appropriately shaped deck, with proper clearance, in order to avoid wheel bite. Sidewinder's are unstable at high speeds and are not recommend for downhill skating.
Features: Double Kingpin
Hanger Length: 6.22" (158mm)
Axle Length: 9" (228.6mm)
Axle Diameter: 8mm
Hole Pattern: New School, Old School
Bushings: Barrel Board Side, Short Cone Road Side
Set Weight of Two: 2lbs 3oz
Built The Right Way
We may be the only company that installs bearing spacers on every longboard. Bearing spacers provide precise alignment of the bearings, making them faster, last longer, and reduces wheel wear.
We developed our own riser pad made from urethane, the same durable shock absorbing material used for wheels. Our urethane riser pad creates a smoother ride, keeps hardware tight and extends the life of your longboard.
We use stainless steel hardware because it's stronger and rust resistant. We also dreamed up the nylon seating washer, which prevents the hardware from tearing up the grip tape.
Similar to the way your favorite tire company installs the lug nuts on your wheels, we use a torque driver to ensure every screw and nut is installed with the same amount of pressure.