The Gullwing Stalker 9.5" 40 Degree Silver trucks are designed for downhill, freeriding, freestyle, carving, and cruising. Casted with aluminum, the hanger measures 6.69" long with a 9.88" axle length. Black rubber sits inside the hanger to dampen vibration over rough terrain. The tapered axle provides additional strength. The 40 degree baseplate provides stability and a broad turing radius. With a board side barrel bushing for additional stability, the road side tall cone dips into turns.
Materials: Aluminum, Rubber
Features: Patented Vibration Damping System, Rubberized Black Finish, Tapered Axle Facings
Hanger Length: 6.69" (170mm)
Axle Length: 9.88" (252mm)
Axle Diameter: 8mm
Baseplate Angle: 40°
Hole Pattern: New School, Old School
Bushings: Barrel Board Side, Tall Cone Road Side
Set Weight of Two: 2lbs 2oz
Built The Right Way
We may be the only company that installs bearing spacers on every longboard. Bearing spacers provide precise alignment of the bearings, making them faster, last longer, and reduces wheel wear.
We developed our own riser pad made from urethane, the same durable shock absorbing material used for wheels. Our urethane riser pad creates a smoother ride, keeps hardware tight and extends the life of your longboard.
We use stainless steel hardware because it's stronger and rust resistant. We also dreamed up the nylon seating washer, which prevents the hardware from tearing up the grip tape.
Similar to the way your favorite tire company installs the lug nuts on your wheels, we use a torque driver to ensure every screw and nut is installed with the same amount of pressure.