The Paris 150mm V2 50 Degree Black Raw trucks are designed for carving, cruising, and freestyle. Gravity molded with 356.2 virgin aluminum, the hanger measures 150mm long with a 225mm axle length. With a board side barrel bushing for stability, the road side tall cone provides agility. Secondary heat treated for strength, the 50° baseplate has a tight turing radius.
Materials: Gravity Molded 356.2 Virgin Molded
Features: Secondary Heat Treated, Faced Hanger, Branded Grade 8 Steel Axle, Branded Grade 8 Steel Kingpin
Hanger Length: 150mm
Axle Length: 225mm
Axle Diameter: 8mm
Baseplate Angle: 50°
Bushings: Board Side Barrel, Tall Cone Road Side
Bushing Durometer: 90a Divine Urethane
Hole Pattern: New School Old School
Set Weight of Two: 2lbs 15oz
Built The Right Way
We may be the only company that installs bearing spacers on every longboard. Bearing spacers provide precise alignment of the bearings, making them faster, last longer, and reduces wheel wear.
We developed our own riser pad made from urethane, the same durable shock absorbing material used for wheels. Our urethane riser pad creates a smoother ride, keeps hardware tight and extends the life of your longboard.
We use stainless steel hardware because it's stronger and rust resistant. We also dreamed up the nylon seating washer, which prevents the hardware from tearing up the grip tape.
Similar to the way your favorite tire company installs the lug nuts on your wheels, we use a torque driver to ensure every screw and nut is installed with the same amount of pressure.