Finally, a bearing cleaning unit brought to you by the bearing company by which all quality standards are measured. This unit is made of fluorinated high density polyethylene and is designed to clean up to 8 bearings at a time. They are separated on a pin by 7 spacers to insure good flow of the cleaning agent throughout all the bearings and allowing more room for the debris to work it's way out.
Unfortunately, due to extremely stringent transit regulations, we cannot supply a cleaning agent. We recommend high purity alcohol or acetone, which can be found at your local hardware store. Some skate shops may carry citrus cleaners or some other solutions which do work but are oil based and will leave a film on the internal workings of the bearings.
When using the bearing cleaning unit and ANY solvents, please make sure to work in a well ventilated area that is not near an open flame. A detailed instruction sheet will also be included with the unit to insure easy and proper use.
Built The Right Way
We may be the only company that installs bearing spacers on every longboard. Bearing spacers provide precise alignment of the bearings, making them faster, last longer, and reduces wheel wear.
We developed our own riser pad made from urethane, the same durable shock absorbing material used for wheels. Our urethane riser pad creates a smoother ride, keeps hardware tight and extends the life of your longboard.
We use stainless steel hardware because it's stronger and rust resistant. We also dreamed up the nylon seating washer, which prevents the hardware from tearing up the grip tape.
Similar to the way your favorite tire company installs the lug nuts on your wheels, we use a torque driver to ensure every screw and nut is installed with the same amount of pressure.